Description
Clinical Description
100 x ReMed Needles 34 G x 4 mm are ultra-fine, single-use hypodermic needles intended as a professional delivery accessory for injectable medical and aesthetic procedures. The needle has a 34G gauge and 4 mm length, providing a short, fine-format configuration intended for applications where controlled needle handling and accurate product delivery are required .
Available product documentation describes ReMed needles as individually sterile packaged and intended for single use. The range is offered in multiple gauge and length combinations, with the 34G × 4 mm configuration positioned among the shorter, finer needle options .
As a needle rather than an injectable device containing a therapeutic formulation, this product contains no HA, polynucleotides, peptides, lidocaine, or other active injectable ingredients. Its function is to provide a sterile needle interface for professional injection procedures. The exact intended indications, material specification, sterilisation method and performance characteristics for this particular SKU are not provided by the manufacturer in publicly accessible documentation reviewed for this page.
For clinics looking to buy ReMed Needles 34 G x 4 mm, this 100-piece presentation is suitable for professional clinical stock management.
What 100 x ReMed Needles 34 G x 4 mm Is Similar To
The closest comparison is with other 34G short hypodermic needles used for professional aesthetic injection procedures. For example, TSK Select™ Needle 34G × 4 mm is also supplied as a 34G × 4 mm needle in a 100-piece presentation. TSK’s manufacturer documentation identifies the product as a single-use injection needle and specifies a 34G (0.18 mm) × 4 mm configuration .
The principal similarity is therefore dimensional: both products provide a very fine 34G needle with a short 4 mm length. However, the construction, hub design, materials, regulatory status and manufacturer-specific performance characteristics may differ.
TSK documentation, for example, specifies features including a marked hub and luer-lock configuration, whereas equivalent technical details for the ReMed 34G × 4 mm product could not be independently verified from a publicly available manufacturer IFU .
These products should therefore not be regarded as automatically interchangeable simply because they share the same gauge and length.
This comparison is provided for clinical orientation only and does not imply interchangeability.
Treatment Areas / Indications
The ReMed 34G × 4 mm needle is described in available product documentation for professional injection, cosmetic and medical-aesthetic applications .
Specific anatomical treatment areas for this exact SKU are not provided by the manufacturer in publicly accessible documentation reviewed for this page.
The needle should therefore be selected according to the indication and official instructions applicable to the injectable product being administered.
Usage / Administration
Manufacturer IFU-only information
The following technical parameters were specifically checked against publicly accessible documentation:
- Needle gauge: 34G
- Needle length: 4 mm
- Frequency / number of treatment sessions: not provided by manufacturer
Available product documentation identifies the 34G × 4 mm format as a professional needle for injectable/aesthetic applications and describes it as individually sterile packaged and intended for single use .
Important: The 4 mm physical needle length must not be interpreted as a prescribed injection depth. Injection depth, angle, product volume and treatment protocol depend on the specific medicinal or medical-aesthetic product being administered and its applicable instructions for use.
Some practitioners may use short 34G needles for superficial aesthetic injection procedures; such application methods are not included here as manufacturer guidance for ReMed.
Ingredient List
This is a needle/consumable device and does not contain an injectable formulation.
- Active ingredients: none
- Hyaluronic acid: not applicable
- Polynucleotides: not applicable
- Lidocaine: not applicable
- Peptides/amino acids: not applicable
- Other injectable excipients: not applicable
- Needle material: not provided by manufacturer in publicly accessible documentation reviewed
Presentation & Longevity
Presentation: 100 needles per pack
Needle size: 34G × 4 mm
Sterility: Product documentation describes the needles as individually sterile packaged .
Use: Single use only .
Any shelf-life or storage requirements should be verified against the product packaging and current manufacturer documentation before clinical use.
Safety Notes / Contraindications
This product is a sterile, single-use needle intended for professional use. Available product documentation states that ReMed needles should not be reused .
For safe use:
- Use a new sterile needle for each procedure and dispose of it appropriately after single use.
- Do not use if the sterile packaging is damaged, opened or otherwise compromised.
- Select needle size and injection technique according to the relevant injectable product’s official instructions and the practitioner’s professional training.
- Specific contraindications for this exact ReMed needle have not been located in a publicly accessible manufacturer IFU.
As with any injection procedure, the clinical suitability of the procedure and injectable product must be assessed by the appropriately qualified healthcare professional.
Regulatory Status
Regulatory classification: not specified in publicly accessible manufacturer documentation reviewed.
CE / UKCA / FDA status: not independently verified for this exact 100 × ReMed 34G × 4 mm product.
Regulatory classification not specified in public documentation; verify on the product pack or manufacturer’s IFU.
Practitioners and purchasing teams should verify the applicable conformity marking, responsible economic operator information and regulatory documentation on the packaging before placing the product into clinical use in the relevant jurisdiction.
FAQ
1. What are ReMed Needles 34 G x 4 mm used for?
ReMed 34G × 4 mm needles are professional single-use hypodermic needles intended for injectable medical and aesthetic applications. Available product documentation describes the ReMed range as suitable for professional injection and aesthetic procedures and identifies the 34G × 4 mm configuration as one of the available sizes . The needle itself does not contain an active ingredient or treatment formulation. Its precise clinical application should be determined according to the instructions for the injectable product being administered and the practitioner’s professional training.
2. Are ReMed 34G × 4 mm needles sterile?
Available product documentation states that ReMed needles are individually sterile packaged and intended for single use . Sterility is relevant to maintaining appropriate infection-control standards during injectable procedures. The sterile packaging should remain intact until the needle is required for use. If packaging is damaged, opened or otherwise compromised, the needle should not be used. Practitioners should also follow applicable local infection-control procedures and the manufacturer’s instructions supplied with the product.
3. What does 34G × 4 mm mean?
The 34G specification describes the needle gauge, while 4 mm describes its nominal needle length. A 34G needle is a very fine-gauge needle, and 4 mm represents a short needle length. These dimensions describe the physical characteristics of the needle rather than prescribing an injection depth. The appropriate depth, angle, volume and technique must be determined from the official instructions applicable to the injectable product and the practitioner’s clinical training. The manufacturer’s publicly accessible documentation reviewed does not provide a specific injection-depth protocol for this SKU .
4. Can ReMed 34G × 4 mm needles be reused?
No. Available product documentation identifies ReMed needles as single-use products . A new sterile needle should be used for each procedure in accordance with appropriate clinical infection-control practice. Reusing a disposable needle can compromise sterility and may introduce avoidable clinical risks. Used needles should be disposed of through the appropriate sharps-disposal process in accordance with applicable local requirements. ReMed’s publicly available product information does not support reuse of the 34G × 4 mm needle.
5. How do ReMed 34G × 4 mm needles compare with other 34G needles?
ReMed 34G × 4 mm needles share the same basic dimensional format as other 34G × 4 mm professional injection needles. For example, TSK Select™ Needle is also available in a 34G × 4 mm configuration . However, gauge and length alone do not establish equivalence. Hub design, wall construction, materials, sterility specifications, regulatory status and manufacturer instructions can differ between products. Practitioners should therefore verify compatibility and intended use rather than substituting one needle for another solely because both are labelled 34G × 4 mm.
